Reasons For Rusting Of Diamond Saw Blades

Generally, the rust factors of diamond saw blades are: the package is damaged and the place where it is placed is relatively humid, and the water mist generated contacts the diamond saw blade from the damaged entrance, resulting in oxidation; in the place where the saw blade is stored, liquid seeps into the saw blade package inside, causing oxidation, which leads to rust.

Therefore, when the diamond saw blade is not in use, it should be placed in a ventilated and dry place, and the packaging should not be damaged.

How to deal with rusted saw blades

If it is found that the saw blade is rusted, do not use it as usual at this time, it is especially easy to cause tooth chipping and other phenomena, thereby causing damage to the saw blade. We must carry out operations such as rust removal before it can be used.

First check the rusted part. If the rusted part is in the position of the sawtooth, it will be a bit troublesome. In this case, it must be processed with a diamond grinding wheel, because the sawtooth is the most sensitive part of the saw blade. It will seriously affect the use of the diamond saw blade, and it is very likely to cause the saw blade to be scrapped.

If it is the base part, it is easy to handle, just use our common rust removal method.